LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Seats (Circuit Diagnosis)) >> Circuit Diagnosis >> Seat Cushion Thermal Electric Device Sensor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SEAT CUSHION THERMAL ELECTRIC DEVICE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat blower motor assembly connector.
    3. Check resistance between seat cushion thermal electric device terminals.

      Seat cushion thermal electric device

      Resistance

      (Approx.)

      Terminals

      2

      3

      1000Ω *

      * : When sensor temperature is 25°C (77°F).

    Is the inspection result normal?

    YES

    Inspection End.

    NO

    Replace climate controlled seat blower motor assembly. Refer to Climate Controlled Seat Blower Assembly .

scientia non olet · About LEMON Manuals