LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Seats (Circuit Diagnosis)) >> Circuit Diagnosis >> Climate Controlled Seat Blower Motor >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CLIMATE CONTROLLED SEAT BLOWER MOTOR POWER SUPPLY 
    1. Turn ignition switch ON.
    2. Check voltage between climate controlled seat blower motor assembly harness connector and ground.

      (+)

      (-)

      Condition

      Voltage

      (Approx.)

      Climate controlled seat blower motor assembly

      Connector

      Terminal

      LH

      B206

      8

      Ground

      Climate controlled seat switch

      HEAT mode

      Battery voltage

      COOL mode

      Other than above

      0

      RH

      B317

      Climate controlled seat switch

      HEAT mode

      Battery voltage

      COOL mode

      Other than above

      0

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    GO TO 2.

  2. CHECK CLIMATE CONTROLLED SEAT BLOWER MOTOR POWER SUPPLY CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat blower motor assembly connector and climate controlled seat control unit connector.
    3. Check continuity between climate controlled seat blower motor assembly harness connector and climate controlled seat control unit harness connector.

      Climate controlled seat blower motor assembly

      Climate controlled seat control unit

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      LH

      B206

      8

      B216

      12

      Yes

      RH

      B317

      B312

    4. Check continuity between climate controlled seat blower motor assembly harness connector and ground.

      climate controlled seat blower motor assembly

      Ground

      Continuity

      Connector

      Terminal

      LH

      B206

      8

      No

      RH

      B317

    Is the inspection result normal?

    YES

    Replace climate controlled seat control unit. Refer to Climate Controlled Seat Control Unit .

    NO

    Repair or replace harness.

  3. CHECK CLIMATE CONTROLLED SEAT BLOWER MOTOR SPEED CONTROL SIGNAL 

    Check voltage between climate controlled seat blower motor assembly harness connector and ground.

    (+)

    (-)

    Condition

    Voltage

    (Approx.)

    Climate controlled seat blower motor assembly

    Connector

    Terminal

    LH

    B206

    7

    Ground

    Climate controlled seat switch

    HEAT

    8.5 - 9

    COOL

    HI

    Battery voltage

    MID

    9.0

    LO

    8.0

    Other than above

    0

    RH

    B317

    Climate controlled seat switch

    HEAT

    8.5 - 9

    COOL

    HI

    Battery voltage

    MID

    9.0

    LO

    8.0

    Other than above

    0

    Is the inspection result normal?

    YES

    GO TO 5.

    NO

    GO TO 4.

  4. CHECK CLIMATE CONTROLLED SEAT BLOWER MOTOR SPEED CONTROL SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat blower motor assembly connector and climate controlled seat control unit connector.
    3. Check continuity between climate controlled seat blower motor assembly harness connector and climate controlled seat control unit harness connector.

      Climate controlled seat blower motor assembly

      Climate controlled seat control unit

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      LH

      B206

      7

      B216

      4

      Yes

      RH

      B317

      B312

    4. Check continuity between climate controlled seatback blower motor harness connector and ground.

      Climate controlled seat blower motor assembly

      Ground

      Continuity

      Connector

      Terminal

      LH

      B206

      7

      No

      RH

      B317

    Is the inspection result normal?

    YES

    Replace climate controlled seat control unit. Refer to Climate Controlled Seat Control Unit .

    NO

    Repair or replace harness.

  5. CHECK CLIMATE CONTROLLED SEAT BLOWER MOTOR GROUND CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect climate controlled seat blower motor assembly and climate controlled seat control unit connector.
    3. Check continuity between climate controlled seat blower motor assembly harness connector and climate controlled seat control unit harness connector.

      Climate controlled seat blower motor assembly

      Climate controlled seat control unit

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      LH

      B206

      6

      B216

      20

      Yes

      RH

      B317

      B312

    4. Check continuity between climate controlled seatback blower motor harness connector and ground.

      climate controlled seat blower motor assembly

      Ground

      Continuity

      Connector

      Terminal

      LH

      B206

      6

      No

      RH

      B317

    Is the inspection result normal?

    YES

    Replace climate controlled seat blower motor assembly. Refer to Climate Controlled Seat Blower Assembly .

    NO

    Repair or replace harness.