LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Instrument Panel) >> Removal And Installation >> Cluster Lid C >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cluster lid A. Refer to Removal and Installation .
  2. Remove center ventilator grille (RH). Refer to Removal and Installation .
  3. Remove cluster lid C screws, disconnect harness connector from control unit, then remove cluster lid C from instrument panel and pad assembly.
    CAUTION: The AV control unit and the front air control use the same 24-pin connector. Caution must be used to prevent misconnection. Colored tape has been added to the wiring harness to identify the connector.
    • White = AV control unit
    • Green = Front air control
  4. Remove center ventilator grille (LH) from cluster lid C. Refer to Removal and Installation .
  5. Remove front air control from cluster lid C. Refer to Removal and Installation - Front Air Control .
scientia non olet · About LEMON Manuals