LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 241 (Instrument Panel) >> Removal And Installation >> Center Console Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector (1) from the center console assembly located under floor trim (2) near the front edge of the driver seat.
    GNSDB112501Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL : Front

  2. Open the center console lid and remove storage tray (for access). Remove the four bolts located inside the console, using a suitable tool (A).
  3. Remove the two bolts located in the front storage tray.
  4. Remove center console as an assembly from the floor.
    5. CAUTION: Always use an assistant to steady the center console assembly during removal.
scientia non olet · About LEMON Manuals