Hood Stay: Disposal
WARNING: This page is about a different car, the 2018 Nissan NV3500 HD, 2018 Nissan NV2500 HD, and 2018 Nissan NV1500. However, it is still accessible from the selected car via links, so may be relevant.
- Fix hood stay (1) using a vise (C).
- Using hacksaw (A) slowly make two holes in the hood stay (1), in numerical order as shown.CAUTION:
- When cutting a hole on hood stay (1), cover hacksaw (A) with a shop cloth (B) to avoid scattering metal fragments or oil.
- Wear eye protection (safety glasses).
- Wear gloves.
|
A: |
20 mm (0.79 in) |
|
B: |
Cut at the groove. |