Component Inspection (Heated Steering Wheel)
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HEATED STEERING WHEEL CONTINUITY
- Turn ignition switch OFF.
- Remove the heated steering wheel. Refer to Removal and Installation .
- Check continuity between heated steering wheel connector terminals.
Terminals
Condition
Continuity
1 - 2
Surface temperature of less than 30°C (86°F)
Yes
Surface temperature of 30°C (86°F) or more
No
Is the inspection result normal?
YES
GO TO 2 .
NO
Replace heated steering wheel. Refer to Removal and Installation .
- CHECK HEATED STEERING WHEEL RESISTANCE
Check resistance between heated steering wheel connector terminals.
Terminals
Condition
Resistance
1 - 2
Surface temperature of 20°C (68°F)
1.7 - 2.17 Ω
Is the inspection result normal?
YES
Inspection End.
NO
Replace heated steering wheel. Refer to Removal and Installation .