LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Front Propeller Shaft - 2F (Double CARDAN)) >> Unit Disassembly And Assembly >> Front Propeller Shaft >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Put matching marks on the front propeller shaft and flange yoke as shown.
    G04134270Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: For matching marks, use paint. Do not damage the front propeller shaft or flange yoke.
  2. Remove the snap rings.
    G04134271Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Do not reuse snap rings.
  3. Push out and remove the journal bearings by lightly tapping the flange yoke with a suitable tool, taking care not to damage the journal or flange yoke hole.
    G04134272Courtesy of NISSAN NORTH AMERICA, INC.
    NOTE: Put marks on the disassembled parts so that they can be reinstalled in their original positions from which they were removed.
  4. Push out and remove the remaining journals at the opposite side by lightly tapping the flange yoke with a suitable tool, taking care not to damage the journal or flange yoke hole.
    G04134273Courtesy of NISSAN NORTH AMERICA, INC.
    NOTE: Put marks on the disassembled parts so that they can be reinstalled in their original positions from which they were removed.
scientia non olet · About LEMON Manuals