LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Interior Trim) >> Removal And Installation >> Rear Parcel Shelf Finisher >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear seatback assembly. Refer to Removal and Installation .
  2. Remove rear kicking plate inners (LH/RH). Refer to Removal and Installation - Inner .
  3. Remove high-mounted stop lamp. Refer to Removal and Installation (LED HEADLAMP) or Removal and Installation (HALOGEN HEADLAMP).
  4. Remove rear pillar finishers (RH/LH). Refer to Removal and Installation .
  5. Thread rear seat belts (RH/LH/center) through vertical opening and release from rear parcel shelf finisher.
  6. Using a suitable tool, release clips and dual lock fasteners, then remove rear parcel shelf finisher.
scientia non olet · About LEMON Manuals