LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Front Final Drive (Ma210)) >> Removal And Installation >> Carrier Cover >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain differential gear oil. Refer to Draining .
  2. Remove the front final drive assembly. Refer to Removal and Installation .
  3. Remove the carrier cover bolts and separate the carrier cover from the gear carrier.
    CAUTION:
    • Do not damage the mating surface.
    • Do not insert flat-bladed screwdriver, this will damage the mating surface.
    • Do not reuse gasket.
scientia non olet · About LEMON Manuals