Inspection After disassembly
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
Side shaft
- If it is chipped (by friction), cracked, damaged, or unusually worn, replace.
Bearing
- Clean up the disassembled parts.
- If any chipped (by friction), pitted, worn, rusted or scratched marks, or unusual noise from the bearing is observed, replace as a bearing assembly (as a new set).
Oil Seal
- Whenever disassembled, replace.
- If wear, deterioration (sealing force lips), or damage is detected on the lips, replace.