Component Inspection (Fuel Tank Temperature Sensor)
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUEL TANK TEMPERATURE SENSOR
- Turn ignition switch OFF.
- Disconnect "fuel level sensor unit and fuel pump" harness connector.
- Remove fuel level sensor unit.
- Check resistance between "fuel level sensor unit and fuel pump" terminals by heating with hot water as shown in the figure.
Terminals
Condition
Resistance (kΩ)
3 and 4
Temperature [°C (°F)]
20 (68)
2.3 - 2.7
50 (122)
0.79 - 0.90
Is the inspection result normal?
YES
INSPECTION END
NO
Replace "fuel level sensor unit and fuel pump".