LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Engine Control System (DTCS) (5.6L) (6 Of 8)) >> DTC/Circuit Diagnosis >> P100A VVEL System >> Component Inspection (VVEL ACTUATOR MOTOR)

Component Inspection (VVEL ACTUATOR MOTOR)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK VVEL ACTUATOR MOTOR 
    1. Turn ignition switch OFF.
    2. Disconnect VVEL actuator motor harness connector.
    3. Check resistance between VVEL actuator motor terminals as per the following.

      VVEL actuator motor

      Resistance

      Terminal

      1 and 2

      16Ω or less

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    GO TO 2 .

  2. REPLACE VVEL ACTUATOR MOTOR ASSEMBLY 

    Replace VVEL actuator motor assembly. Refer to Removal and Installation .

    INSPECTION END

scientia non olet · About LEMON Manuals