Component Inspection
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK EOP SENSOR
- Turn ignition switch OFF.
- Disconnect EOP sensor harness connector.
- Check resistance between EOP sensor connector terminals.
EOP sensor
Condition
Resistance
Terminal
1
2
None
4kΩ - 10 kΩ
3
2kΩ - 8 kΩ
2
3
1kΩ - 3 kΩ
Is the inspection result normal?
YES
INSPECTION END.
NO
Replace EOP sensor. Refer to Exploded View .