LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Engine Control System (DTCS) (5.6L) (6 Of 8)) >> DTC/Circuit Diagnosis >> P0460 Fuel Level Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 
    • If DTC P0460 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX.
    • If DTC P0460 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607.

    Is applicable DTC detected?

    YES

    Perform the diagnosis of the applicable. Refer to DTC Index .

    NO

    GO TO 2 .

  2. PRECONDITIONING 
    1. Turn ignition switch OFF and wait at least 10 seconds.
    2. Turn ignition switch ON.
    3. Turn ignition switch OFF and wait at least 10 seconds.

    GO TO 3 .

  3. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start engine and wait maximum of 2 consecutive minutes.
    2. Check 1st trip DTC.

    Is 1st trip DTC detected?

    YES

    Proceed to Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals