Component Inspection (Intake Air Temperature Sensor)

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK INTAKE AIR TEMPERATURE SENSOR

Turn ignition switch OFF.
Disconnect mass air flow sensor harness connector.

Check resistance between mass air flow sensor terminals as per the following.

Terminals	Condition		Resistance (kΩ)
1 and 2	Temperature [°C (°F)]	25 (77)	1.94 - 2.06

Is the inspection result normal?

YES

INSPECTION END

Replace mass air flow sensor (with intake air temperature sensor). Refer to Removal and Installation .