LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (6 Of 6)) >> DTC/Circuit Diagnosis >> DTC P2BA7-00: Urea Tank Level >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test:

    1. Turn ignition switch ON.
    2. Connect CONSULT and check for current "ENGINE" diagnostic trouble codes.
    3. Check for DTC P2BA7 - 00 being current on the CONSULT screen.

    Is DTC P2BA7 - 00 current?

    YES

    Go to Diagnosis Procedure .

    NO

    Inspection End.