LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (6 Of 6)) >> DTC/Circuit Diagnosis >> DTC P263E-00: Glow Plug Control Module Over Temperature >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is triggered when the glow plug control module internal temperature is greater than 125°C for more than 3 seconds.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P263E

(Glow Plug Control Module 1 Over Temperature)

Diagnosis condition

Ignition switch is ON or engine is running

Signal (terminal)

-

Threshold

  • Glow plug control module ASIC temperature > 150°C for 2 seconds.

    OR

  • Glow plug control module PCB temperature > 125°C for 2.5 seconds.

Diagnosis delay time

Diagnostic runs continuously when the engine is running