LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (6 Of 6)) >> DTC/Circuit Diagnosis >> DTC P2495-00: EGR Cooler Bypass Position Sensor Circuit High >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

EGR bypass valve position greater than specified operating range for a calibrated amount of time.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P2495-00

EGR BYPASS VLV POS V

EGR BYPASS VLV CMD

Diagnosis condition

Ignition switch ON or the engine is running.

Signal (terminal)

EGR bypass valve position sensor signal

Threshold

The ECM detected the EGR bypass valve position signal voltage is greater than 4.7V.

Diagnosis delay time

-