LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (6 Of 6)) >> DTC/Circuit Diagnosis >> DTC P244D-00: Exhaust Temperature Too High For Pf Regeneration >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

Persistent temperature overshoots the after treatment DPF outlet gas temperature during active regeneration of the DPF.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P244D-00

DPF INLET TEMP

DPF OUTLET TEMP

SCR INLET TEMP

SCR OUTLET TEMP

Diagnosis condition

This diagnostic runs continuously when the ignition switch is in the ON position and the engine is running.

Signal (terminal)

SCR outlet temperature sensor signal

Threshold

The DPF outlet temperature sensor was greater than 650°C (1202°F) for 5 seconds on five separate occasions.

Diagnosis delay time

-