LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (4 Of 6)) >> DTC/Circuit Diagnosis >> DTC P1A62-00: TC Actuator Position >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The turbocharger has failed to detect endpoint or stop references under engine operating conditions.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P1A62-00

Turbo Actuator Software Error

(Engine turbocharger 1 turbine - bypass actuator 1position - special instructions)

1

Diagnosis condition

Continuously when key is ON, or engine is running

Signal (terminal)

-

Threshold

Turbine bypass valve reports that it is in a state with no known calibration data or it is in the process of doing an installation

Diagnosis delay time

Diagnostic runs continuously when the engine is running