LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (4 Of 6)) >> DTC/Circuit Diagnosis >> DTC P1615-00: DPF Temperature Sensor Module Shorted Low >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

    1. Turn the ignition switch ON.
    2. Start the engine and let it idle for 1 minute.
    3. Connect CONSULT and check for current "ENGINE" diagnostic trouble codes.
    4. Check for DTC P1615-00 being current on the CONSULT screen.

    Is DTC P1615-00 current?

    YES

    Go to Diagnosis Procedure .

    NO

    Inspection End.