DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The Engine Control Module (ECM) detected the crankshaft position does not match the camshaft position signal input to the ECM.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0A0F-00 |
ENGINE FAILED TO START (Engine Failed to Start) |
Diagnosis condition |
Engine cranking |
|
Signal (terminal) |
(-) |
||
|
Threshold |
Engine synchronization time > 5 seconds |
||
|
Diagnosis delay time |
Diagnostic runs continuously when engine is running |
||