LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (2 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0257-00: Fuel Pump Metering Control Range/Performance >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The Engine Control Module (ECM) detected the internal temperature of the pressure relief valve driver has exceeded 160°C.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0257-00

[Injection Pump Fuel Metering Control "B" Range/Performance (Cam/Rotor/Injector)]

Diagnosis condition

Ignition switch is ON or engine is running

Signal (terminal)

(-)

Threshold

Fuel pressure relief valve driver has exceeded > 160°C

Diagnosis delay time

Diagnostic runs continuously when the ignition is ON or engine is running