DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The Engine Control Module (ECM) detected the Fuel Pump Actuator driver has overheated
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0252-00 |
[Injection Pump Fuel Metering Control "A" Range/Performance (Cam/Rotor/Injector)] |
Diagnosis condition |
Ignition switch is ON |
|
Signal (terminal) |
(-) |
||
|
Threshold |
Volume control valve (VCV) driver ASIC temperature ≥ 165°C |
||
|
Diagnosis delay time |
Diagnostic runs continuously when the ignition is ON |
||