DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The ECM detected the engine had exceeded 4600 RPM.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P0219-00 |
Engine Overspeed Condition (Engine crankshaft speed/position - most severe level) |
1 |
Diagnosis condition |
Continuously when key is ON, or engine is running |
|
Signal (terminal) |
- |
|||
|
Threshold |
Engine speed > 4, 650 RPM |
|||
|
Diagnosis delay time |
Diagnostic runs continuously when the engine is running |
|||