Removal and Installation: Removal
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
To avoid the risk of injury to eyes and skin, when using caustic solutions, solvents, acids, or alkaline materials follow the manufacturer's recommendations for use and wear appropriate eye protection and protective clothing. Some of these materials are also flammable. To avoid risk of fire or burns, never smoke or allow sparks or flames (such as pilot lights, electrical switches, or welding equipment) in the work area. Avoid spilling onto a hot exhaust manifold which can cause a fire.
- Disconnect the battery or batteries. Refer to Battery Disconnect .
- Remove the front cover. Refer to Removal and Installation .
- Thoroughly clean the area around the oil pressure regulator plug with clean solvent to prevent debris from falling into the plunger bore when the plug is removed.
- Remove the threaded plug (3) from the plunger bore (A).
- Remove the oil pressure regulator spring (2) and oil pressure regulator (1).