Connecting Rod Bearings

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

Measure the connecting rod bearing (1) thickness in the center (A) and halfway between the bearing ends with a suitable tool (B) that has a ball tip.

Courtesy of NISSAN NORTH AMERICA, INC.

NOTE: The upper and lower connecting rod bearings have different part numbers.

Standard

: Refer to MAIN BEARING .

Do not reuse the connecting rod bearing if its thickness is below the minimum specification.
If any connecting rod bearing is replaced, they must be replaced as a pair.