Exploded View
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
|
1. |
Vacuum tube |
2. |
Vacuum hose |
3. |
Vacuum hose |
|
4. |
Vacuum hose |
5. |
Turbocharger compressor bypass solenoid |
6. |
Copper sealing washer |
|
7. |
Turbocharger oil supply cylinder block fitting |
8. |
O-ring |
9. |
Turbocharger compressor bypass solenoid bracket. |
|
10. |
O-ring |
11. |
Turbocharger oil supply line |
12. |
Copper sealing washer |
|
13. |
Turbocharger oil drain line gasket |
14. |
Turbocharger oil drain line |
15. |
O-ring |
|
16. |
Rotary turbine control valve linkage |
17. |
Rotary turbine control valve actuator |
A. |
Clip |
CAUTION:
If the rotary turbine control valve linkage was only removed from the actuator side, the rotary turbine control valve linkage can be reattached to the actuator and reused. If the rotary turbine control valve linkage was removed from the turbine valve shaft, the rotary turbine control valve linkage must be replaced.