LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Mechanical (CUMMINS 5.0L) (2 Of 2)) >> Removal And Installation >> Turbocharger Compressor Bypass Solenoid >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the harness connector (A) from the turbocharger compressor bypass solenoid (3).
    GNSALBIA2072Z-072Courtesy of NISSAN NORTH AMERICA, INC.
  2. Remove the vacuum hoses (1) and (2) from the turbocharger compressor bypass solenoid.
  3. Remove bolt (B) and remove the turbocharger compressor bypass solenoid.
scientia non olet · About LEMON Manuals