Inspection After Removal
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the rotary turbine control valve linkage bolts and threaded rod for damaged threads.
- Check the threaded rod for cracking, bending, and loose fit with the spherical housing.
- Replace any damaged components.
- Inspect the ball joint race for damage and loose fit.
- Inspect the ball joint rivets for loose fit with the levers. The ball stud must not be loose with the lever.NOTE: If the rotary turbine control valve linkage was only removed from the actuator side, the rotary turbine control valve linkage can be reattached to the actuator and reused. If the rotary turbine control valve linkage was removed from the turbine valve shaft, the rotary turbine control valve linkage must be replaced.