LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Mechanical (CUMMINS 5.0L) (2 Of 2)) >> Removal And Installation >> Fuel Rail To Fuel Rail Supply Line (High Pressure) >> Removal and Installation >> Inspection Before Removal

Inspection Before Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Diesel fuel and diesel fuel vapor is flammable. To avoid risk of fire or burns, never smoke or allow sparks or flames (such as pilot lights, electrical switches, or welding equipment) in the work area. Never allow diesel fuel to spill onto a hot exhaust manifold which can cause a fire.
  • To avoid the risk of personal injury or fire, drain the diesel fuel into an approved container and safely dispose of in accordance with local environment regulations.
  • the fuel system (fuel pump, high-pressure fuel lines, fuel rail, injectors) contain very high-pressure fuel. To avoid the risk of personal injury or fire;
    • Do not loosen any fittings while the engine is running.
    • wait at least 10 minutes after shutting down the engine before loosening any fittings in the high-pressure fuel system to allow pressure to decrease to a lower level.
    • Wear appropriate eye protection and protective equipment as high-pressure fuel spray can penetrate skin.
    • Never smoke or allow sparks or flames (such as pilot lights, electrical switches, or welding equipment) in the work area. Do not allow diesel fuel to spill onto a hot exhaust manifold which can cause a fire.