LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 212 (Engine Mechanical (CUMMINS 5.0L) (2 Of 2)) >> Removal And Installation >> Fuel Rail Supply Line (High Pressure) >> Removal and Installation >> General Information

General Information

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The fuel rail supply line [high pressure (1)] connects the fuel pump to the fuel rail (bank 1), containing high-pressure fuel.

GNSALBIA2216Z-216Courtesy of NISSAN NORTH AMERICA, INC.
WARNING: The fuel system (fuel pump, fuel rail supply line (high-pressure), fuel rail, injectors) contain very high pressure fuel. To avoid the risk of personal injury or fire:
  • Do not loosen any fittings while engine is running.
  • Wait at least 10 minutes after shutting down the engine before loosening any fittings in the high-pressure fuel system to allow pressure to decrease to a lower level.
  • Wear appropriate eye protection and protective equipment as high-pressure fuel spray can penetrate the skin.
  • Never smoke or allow sparks or flames (such as pilot lights, electrical switches, or welding equipment) in the work area. Never allow diesel fuel to spill onto a hot exhaust manifold which can cause a fire.
CAUTION: Do not reuse fuel rail supply lines [high-pressure) (1)].