Inspection After Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the engine harness connector for the following:

Cracked or broken connector shell
Missing or damaged connector seals
Dirt, debris, or moisture in or on the connector pins
Corroded, bent, broken, pushed back, or expanded pins
Repair or replace the engine harness connector as needed

Inspect the fuel rail (bank 2) for the following:

Damaged seal surface in the rail
Thread damage
Corrosion
Replace the fuel rail (bank 2) if damage is found