LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC U0415-00: Can Communication >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for DTC U0415-00 being current on the CONSULT screen.

    Is DTC U0415-00 detected as current?

    YES

    GO TO 2 .

    NO

    Refer to Intermittent Incident .

  2. CHECK CURRENT CAN DTCS 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for multiple CAN DTCs being current on the CONSULT screen.

    Multiple CAN DTCs current?

    YES

    CAN issue has been detected, check the following:

    • Terminating resistances
    • IPDM E/R
    • Harness and connectors

    NO

    ABS issue has been detected, check the following:

    • ABS actuator and electric unit (control unit) voltage
    • ABS actuator and electric unit (control unit)
    • Harness and connectors