LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC U0402-00: Drivetrain Can Communication (TCM) >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The Engine Control Module (ECM) did not receive a message from the transmission control module.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

U0402-00

TRANSMISSION CONTROL MODULE

(Invalid Data Received From Transmission Control Module)

Diagnosis condition

Continuously when ignition switch is ON or the engine is running.

Signal (terminal)

(-)

Threshold

Invalid status data received from transmission control module.

Diagnosis delay time

Diagnostic runs continuously when the engine is running.