LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC U0307-00: Can Communication >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The ECM detected a software mismatch with the glow plug control module.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

U0307-00

Software Incompatibility With Glow Plug Control Module 1

(Glow plug control module - out of calibration)

Diagnosis condition

Continuously when ignition switch is ON or the engine is running.

Signal (terminal)

-

Threshold

Incorrect software ID received.

Diagnosis delay time

Diagnostic runs continuously when the engine is running.