LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC U010E-00: Can Communication >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The ECM and the after treatment diesel exhaust fluid controller lost communication via the CAN 2 communication line, or the ECM has detected the after treatment diesel exhaust fluid controller had gone into waiting to shutdown mode.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

U010E-00

(Lost Communication With Reductant Control Module)

Diagnosis condition

Engine running.

Signal (terminal)

(-)

Threshold

Message not received.

Diagnosis delay time

Diagnostic runs continuously when the engine is running.