LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC U0002-00: Drivetrain Can Communication >> DTC Description >> Notes

DTC Description: Notes

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

CAN (Controller Area Network) is the high speed communication line for many of the Vehicle Electronic Control Units (VECU).The CAN communication bus has two 2 lines (CAN high line, CAN low line). These lines are inputted to the Engine Control Module. If the ECM does not receive any messages across the CAN bus for a period of time, this fault will set.