DTC Detection Logic
The turbocharger actuator was expecting to see valid CAN 2 communication lines messages from the ECM, but the actual data received was unreadable or missing.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P0046-00 |
(Turbocharger/Supercharger Boost Control Solenoid "A" Circuit Range/Performance) |
1 |
Diagnosis condition |
Ignition switch is ON or engine running. |
|
Signal (terminal) |
(-) |
|||
|
Threshold |
Turbocharger bypass valve has not received a position command message for greater than or equal to a calibrated time after previously having received a command message. |
|||
|
Diagnosis delay time |
Diagnostic runs continuously when the engine is running |
|||
|
2 |
Diagnosis condition |
Ignition switch is ON or engine running. |
||
|
Signal (terminal) |
(-) |
|||
|
Threshold |
Turbocharger bypass valve has not received a message from the ECM. |
|||
|
Diagnosis delay time |
Diagnostic runs continuously when the engine is running |
|||