LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (1 Of 6)) >> DTC/Circuit Diagnosis >> DTC P003A-00: Rotary Turbine Control Valve Actuator Position >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The turbocharger Rotary Turbine Control Valve actuator position feedback is failed in range, but not clearly "in range high" or "in range low."

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P003A-00

RTCV ACTUATOR POS

RTCV ACTUATOR POS CMD

RTV INSTALL/CALIB STATUS

RTCV HYSTERESIS STATUS

Diagnosis condition

Diagnostic runs continuously when the engine is running.

Signal (terminal)

-

Threshold

The Engine Control Module (ECM) detected the turbocharger position reference is not detected during the learn process.

Diagnosis delay time

-