LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Steering System) >> Removal And Installation >> Steering Wheel >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set front wheels and tires in straight-ahead position.
  2. Remove driver air bag module. Refer to Removal and Installation .
  3. Disconnect harness connector from steering switches.
  4. Disconnect harness connector from steering wheel heater (if equipped).
  5. Remove steering wheel lock nut.
    CAUTION: Do not reuse steering wheel lock nut.
  6. Remove steering wheel using suitable tool.
    CAUTION: Place a piece of tape across spiral cable so it will not be rotated out of position.
  7. If necessary, remove steering switches. Refer to Removal and Installation .
  8. Inspect steering wheel near puller holes for damage. Replace as necessary.
scientia non olet · About LEMON Manuals