LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Steering System) >> Removal And Installation >> Steering Gear And Linkage >> Removal and Installation - Inner socket >> Removal

Removal and Installation - Inner socket: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove boot. Refer to Removal and Installation - Boot .
  2. Remove inner socket.
    GNSDB123702Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: To prevent damage to rack bar when removing inner socket, hold suitable tool (A) across rack bar flats (C) while turning suitable tool (B) across inner socket flats (D).
  3. Remove spacer.
scientia non olet · About LEMON Manuals