DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.
- Allow the engine to cold soak for 8 hours with the ignition OFF.
- Start the engine.
- Connect CONSULT, select "ENGINE" and perform the "Stationary Regeneration" Active Test.
- Using CONSULT, check for current "ENGINE" diagnostic trouble codes.
- Check for DTC P0667-00 being current on the CONSULT screen.
Is DTC P0667-00 current?
YES
Go to Diagnosis Procedure .
NO
Inspection End.