LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0630-00: VIN Not Programmed Or Incompatible - ECM >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The ECM detected the VIN was not programmed in the ECM.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0630-00

VIN Not Programmed or Incompatible - ECM/PCM

(Vehicle identification number - out of calibration)

Diagnosis condition

Continuously when key is ON, or engine is running

Signal (terminal)

-

Threshold

-

Diagnosis delay time

Diagnostic runs continuously when the engine is running