LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P061C-00: ECM >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for DTC P061C-00 being only current DTC on the CONSULT screen.

    Is P061C-00 only current DTC detected?

    YES

    Replace the crankshaft position sensor. Refer to Removal and Installation .GO TO 2 .

    NO

    Refer to DTC Index .

  2. ERASE DTC. 
    1. Connect all components.
    2. With CONSULT, erase all DTCs.
    3. Operate the engine within the conditions for setting DTC found in the DTC description.
    4. Check for existing ENGINE diagnostic trouble codes.

    Is DTC P061C-00 current?

    YES

    Replace the ECM. Refer to Removal and Installation .

    NO

    Refer to Intermittent Incident .

scientia non olet · About LEMON Manuals