LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P0611-00: ECM >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for DTC P0611-00 being current on the CONSULT screen.

    Is applicable DTC detected?

    YES

    GO TO 2 .

    NO

    Refer to Intermittent Incident .

  2. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for any fuel injector DTCs being current on the CONSULT screen.

    Is applicable DTC detected?

    YES

    Refer to DTC Index .

    NO

    GO TO 3 .

  3. CHECK FOR INTERMITTENT CONDITION 

    Interview the customer on driving conditions.

    Was the vehicle stalled at a recent key-off event?

    YES

    Refer to Intermittent Incident .

    NO

    GO TO 4 .

  4. CHECK ENGINE 

    Inspect the vehicle for signs of performance enhancement equipment.

    Has the vehicle been modified with performance enhancement equipment?

    YES

    Inspection End.

    NO

    Refer to Intermittent Incident .