LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P060A-00: ECM >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC PRIORITY 
    1. Turn ignition switch ON.
    2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    3. Check for DTC P060-006 being current DTC on the CONSULT screen.

    Is DTC P060-006 detected as current?

    YES

    Replace the ECM.

    NO

    GO TO 2 .

  2. RECALIBRATE THE ECM 
    1. Turn ignition switch ON.
    2. Connect CONSULT and recalibrate the ECM with the latest engine calibration.
    3. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
    4. Check for DTC P060A-00 being current DTC on the CONSULT screen.

    Is DTC P060A-00 current?

    YES

    Replace the ECM. Refer to Removal and Installation .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals