DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The Engine Control Module (ECM) detected the calibration memory check sum did not match the expected value or it did not complete before ECM shutdown.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0601-00 |
ECM (Internal Control Module Memory Check Sum Error) |
Diagnosis condition |
Ignition is ON or engine is running. |
|
Signal (terminal) |
(-) |
||
|
Threshold |
CRC on calibrations and unchanging trims, code block or other calibrations does not equal the expected values. |
||
|
Diagnosis delay time |
Diagnostic runs continuously when the engine is running |
||