DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The ECM detected cruise control switch input voltage is greater than 4.88V for 20 seconds.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P0581-00 |
Cruise Control Multi-Function Input "A" Circuit High (Cruise control (resistive) signal circuit - voltage above normal or shorted to high source) |
Diagnosis condition |
Continuously when key is ON, or engine is running |
|
Signal (terminal) |
- |
||
|
Threshold |
Cruise control switch value > 4.888 V |
||
|
Diagnosis delay time |
Diagnostic runs continuously when the engine is running |
||