LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (3 Of 6)) >> DTC/Circuit Diagnosis >> DTC P057E-00: Brake Pedal Position Sensor >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test:

    1. Turn the ignition switch ON.
    2. Connect CONSULT and check for current "ENGINE" diagnostic trouble codes.
    3. Check for DTC P057E-00 being current on the CONSULT screen.

    Is DTC P057E-00 current?

    YES

    Go to Diagnosis Procedure .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals